Edge Double Curtain Rod – Flexible Ceiling Mount with Style

The Edge double curtain rod system impresses with its minimalist design, high stability, and maximum flexibility for ceiling installation. Two parallel internal aluminum profiles (14x35 mm) spaced 50 mm apart allow for combining decorative and sheer curtains—ideal for modern interiors, space division, or functional commercial setups.

Mounting is done using stable "Standard" double ceiling brackets, available in five lengths (5 cm to 45 cm). These define the drop from the ceiling and allow for flexible placement independent of the wall—ideal near roller shutters, niches, or open-space concepts.

Thanks to dedicated glider and bracket channels, the curtains move smoothly and without obstruction along both profiles. The number of brackets is automatically calculated based on the selected length. Optional additional brackets and slope joints are available for angled ceilings.

The Edge double curtain rod comes with matching end caps for both tracks and suitable gliders, depending on configuration. The aluminum profiles are available in anodized stainless steel finish or glossy white powder coating.

Available in fixed lengths from 100 cm to 600 cm – precise custom cutting can be requested via the "Shorten by" field. Curved versions are made to order based on a sketch and a photo of the room.

Lengths up to 400 cm are shipped in one piece. Longer rods are divided and delivered with a connector (not load-bearing). A bracket should be installed at the joint.

The Edge double curtain rod system offers clean design, precise engineering, and versatile installation – perfect for demanding residential and commercial projects.

Custom Sizing – How to Order the Correct Length

The selected length refers to the track profile only, excluding end caps. If a custom cut is needed, please enter the shortening amount in the "Shorten by" field. Example: If you require a curtain rod with an exact length of 315 cm, choose 320 cm and enter "5 cm" into the field. Cut-off pieces are not included in delivery.

* Parcel Shipping:
Rods up to 260 cm are shipped in one piece.
Rods longer than 260 cm are divided as follows:
– Up to 520 cm: split in the middle
– Over 520 cm: divided into three equal sections (1/3 + 1/3 + 1/3)
A connector is always included. A ceiling bracket must be installed at the connection point.

* Freight Shipping:
Tracks longer than 260 cm and up to 400 cm are shipped in one piece.
Tracks over 520 cm and up to 600 cm are split in the middle.

* One-piece delivery between 400 cm and 600 cm available on request.

Edge Double Bracket System – Ceiling Mount in Stainless Steel (V2A)

Our double ceiling brackets made of stainless steel V2A provide reliable and durable ceiling installation for the Edge curtain rod system. Suitable for both residential and commercial interiors—robust, precise, and visually unobtrusive.

Installation Instructions:

• Mount the sockets to the ceiling using either a mounting plate or a Spax screw (included).
• Slide the square nut into the mounting channel and align it with the sockets.
• Attach the bracket rods with the double-track holder to the nut.
• Insert the rods into the sockets and tighten the grub screws to fix them in place.

Height can be adjusted by up to 2 cm. If a smaller drop is needed, the rod can be trimmed with a metal saw. The minimum distance to the ceiling is approx. 50 mm.

White Gloss Aluminum Bracket System – Edge Double Track

The Edge double bracket system is also available in glossy white powder-coated aluminum, ideal for bright and modern interior styles. The brackets ensure a durable and visually appealing ceiling mount for your double-track curtain rod.

Installation Instructions:

• Attach the sockets to the ceiling using double-thread screws or Spax screws (both included).
• Insert the square nut into the profile’s mounting track and align it with the sockets.
• Fasten the bracket rods with the track holders to the nut.
• Lift the assembly into place and secure the rods with grub screws.

This version also allows height adjustment up to 2 cm. If a lower ceiling distance is desired, the rods can be shortened from below using a metal saw – minimum drop: approx. 50 mm.

Installing Edge Double Curtain Rods on Sloped Ceilings or Angled Walls

For sloped ceilings or angled walls, we recommend using an adjustable joint for 10 mm rods. The setup is simple and provides full flexibility for challenging angles:

• Use the included threaded pin and knock-in nut to attach the joint to the rod.
• Insert the other end of the joint into the ceiling socket and fix it using a grub screw.

This allows custom angling of the bracket – ideal for attic slopes, pitched ceilings, or angled wall connections. Brackets with and without joints can be freely combined.

Connector for 14x35mm Edge Double Curtain Rods

If the rod is shipped in sections, the track connector ensures a firm, precise joint, so gliders can pass smoothly across the transition.

Finish Options for the Edge Double Curtain Rod

The aluminum profiles are available in two elegant finishes:

• Stainless steel look (anodized) – modern and brushed
• Glossy white (powder-coated) – clean and timeless

All accessories such as brackets, end caps, and wall mounts match the selected profile color.

End Caps for the Edge Double Curtain Rod

Each track can be closed individually with end caps:

• No end caps – open ends, e.g., for niche installation with wall mounts
• 1x aluminum end cap – single-side finish
• 2x aluminum end caps – both ends closed

Gliders for 14x35mm Curtain Rod Profiles

X-Gliders

Made of high-quality plastic, X-gliders ensure smooth curtain movement – ideal for light to medium fabrics.

Twist Gliders

Twist gliders allow easy clipping in and out of curtains at any position along the rod.

Gliders with Stainless Steel Hooks

Extra sturdy gliders with stainless steel hooks – ideal for heavy curtains or frequent use in commercial or public areas.

Loop Gliders

Loop gliders are designed for tab-top curtains. Their rounded shape ensures quiet, smooth gliding even with frequent use.

Included in Delivery – Edge Double Curtain Rod

• 2x 14x35 mm aluminum profiles (in selected length and finish)
• Double ceiling brackets “Edge” (stainless steel V2A or glossy white aluminum)
• Mounting hardware:
  • Stainless brackets: 1x mounting plate, 3x Spax screws with plugs
  • White brackets: 1x double-thread screw with plug, 1x Spax screw with plug
• End caps for both tracks (as selected)
• Curtain gliders (as selected)
• Optional slope joints (as selected)
• Connector (included if rod is delivered in segments)