Curtain rail with standard inner track for ceiling mounting, 1-track.

Classic inner track for attachment to the ceiling. An advantage of the curtain rails with inner track is the possibility to move the curtain absolutely freely along the entire length of the rail. The brackets are installed in the upper run (fastening run) of the profile and always keep the lower run (slider run) free, thus guaranteeing an all-round trouble-free path for the curtain.

You order a complete curtain rail consisting of:
1 pc. inner runner profile Ø 20mm made of aluminium, the white powder-coated surface is absolutely suitable for our carriers and end pieces. Glider width 6mm, length from 100cm to 400cm. Lengths of up to 600cm (also in one piece) are also possible on request.
2 pieces or 3 pieces (depending on the ordered length) standard ceiling bracket, material: stainless steel+aluminium, white powder-coated, including fastening material.
2 pcs. end pieces made of plastic, glossy white.
Desired number of curtain gliders, various glider systems of your choice. We recommend at least 10 gliders per 1 meter curtain width.
*Custom-made products on request, except for straight curtain rails, we also manufacture all our rails in any other shape, absolutely curved according to your needs and room situation.

Order correct length.

Ordered length is the rail length without end pieces.
*If desired, please enter the number in cm in the field "shorten by:". then we will cut the curtain rail to the right length for you. For example: If you need a rail of exactly 253 cm, then under "Tube length" please select -260 cm, and in the field "Shorten by:" enter the number "7 cm". Profile sections are not sent.
* Parcel service shipping: The aluminum profile is divided in the middle from a length of more than 260cm. A connection adapter is included. A support is to be attached to the connection point.
* Freight forwarding: The aluminum profile (up to 400cm) is delivered in one piece.
* Curtain rails 400-600cm (also in one piece) - price on request.

Inner track fastening system for mounting on the ceiling Standard 1-track white.

You can place the white ceiling support on the inner rail absolutely freely.
First mount the bases on the ceiling according to the curtain track length. You can either attach the base with a hanger bolt or screw it directly with a Spax screw.
Then slide the flat nut fastened on the threaded pin into the fastening barrel of the profile and position it according to the base already attached. Screw the ceiling support rods onto the grub screws. Slide the construction towards the ceiling and insert the ceiling support rods into the sockets. Tighten (not too tight) the base grub screws. You can adjust the height of the support in the base by approx. 2 cm and thus align the rail absolutely horizontally on the ceiling. If you want a smaller distance from the rail to the ceiling, it is possible to shorten the ceiling support rod with a hacksaw, the minimum possible distance is approx. 50mm.

Order desired gliders with hooks for curtains and curtains:


X Glider: Standard curtain gliders with pleating hooks, made entirely of plastic, color white, are inserted into the rail at the side.

rotary glider: Comfort curtain gliders with clip-on hooks, made entirely of plastic, color white, these gliders can be screwed in or out at any point on the inner track system.

Glides with stainless steel hooks: Very stable (up to 1.5 kg/each) and at the same time very smooth-running gliders with stainless steel hooks. Especially suitable for heavy drapes and drapes, wet areas and outdoor areas, e.g. curtains for vestibules or wind protection curtains for patios or balconies.

Loop gliders : Sliders for loop curtains made entirely of plastic, color white. Due to its semicircular shape, the sliding element offers very good sliding properties in all of our inner rails.