L-shaped shower rails for shower trays, bathtubs and barrier-free shower areas for disabled showers.
Complete L-shaped shower curtain rod, with inner tube Ø 20mm made of aluminium, the anodized surface in stainless steel look, black or white powder-coated absolutely matches our brackets and end pieces, slider width 6mm. The rod is made in one piece, all-round trouble-free path of the shower curtain, the corner is bent with R=10cm, incl. shower curtain glider with stainless steel hook.
An advantage of the shower rods with an inner profile is the possibility to move the shower curtain freely along the entire length of the rod. The ceiling supports are installed in the upper run (fastening run) of the inner run profile and always keep the lower run (slider run) free, thus guaranteeing a trouble-free path for the curtain all round. Our shower curtain rods are therefore ideally suited to set up a barrier-free shower area for disabled showers.
*Custom-made products on request, we also manufacture our rods in any other shape, bent absolutely according to your needs and space situation.

Order correct size and design.
Ordered sizes are outside dimensions of the rod. You can order the shower rail in shower tray sizes (both sides are the same) or in bathtub sizes (the sides are different lengths). You can use our shower curtain rods left and right.


Here you can see examples of both types of attachment for a shower curtain rail for bathtubs: wall + ceiling attachment and pure ceiling attachment


Important for cuts!The pole is manufactured and delivered in one piece, but the pole ends can always be shortened. So it is always possible to realize the right size. We can do the shortening for you or you can shorten the rod yourself during assembly. If you want us to shorten the shower curtain rail, please select the next suitable size, please enter the desired end dimensions in the "Shorten shower rail" field (Sections are not included!).
Eg you need a shower curtain rod 135x75cm. Please select the size "140x80cm" and write in the "Shorten shower curtain rail" field: "Shorten to 135x75cm!". We will manufacture the bar accordingly and send it in the desired size.

The L-shaped shower curtain rod is designed to be fixed at at least 3 points. You can order the following versions:
Version 1 (wall and ceiling mounting): 2 x wall mounting (wall bracket) and 1 x ceiling mounting (ceiling support).
Version 2 (ceiling mounting only): 3 x ceiling mounts (ceiling brackets) and 2 x end caps (for rod ends).
Version 3 (wall and ceiling mounting): 1 x wall mounting (wall bracket) and 2 x ceiling mounting (ceiling bracket) and 1 x end cap (for rod end).

Shower curtain rod colors.
Our shower curtain rods are made from an aluminum inner profile Ø 20mm. You can choose the following surfaces: stainless steel look, glossy white, matt black and glossy black. The accessories - the ceiling brackets, the wall brackets and the end caps can of course be ordered in the appropriate materials: stainless steel V2A, aluminum white glossy or aluminum black satin finish. Of course it is also possible to combine the colors, e.g. B: Stainless Steel/White, Black/White or Stainless Steel/Black

The accessories made of stainless steel V2A.
L-shaped curved shower rail with inner profile Ø 20mm made of aluminium, anodised in stainless steel look, is absolutely suitable for our brackets and end pieces made of stainless steel V2A.
Wall mounting with wall bracket made of stainless steel V2A:

First mount the wall bearing plate with threaded bush on the wall. Slide the wall bearing cap onto the rod. Slide the rod onto the threaded bushing. Screw the cap onto the threaded bush. Lock the rod with grub screw.
Ceiling attachment with the ceiling bracket made of stainless steel V2A:

You can position the ceiling support absolutely freely on the inner rail. First mount the base on the ceiling according to the desired position. You can either attach the base using a screw-on plate or screw it on directly with a spax screw. Then slide the flat nut fastened on the threaded pin into the fastening barrel of the profile and position it according to the base already attached. Screw the ceiling support rod onto the grub screw. Slide the construction towards the ceiling and insert the ceiling support rod into the base. Tighten (not too tight) the socket grub screw. You can adjust the height of the support in the base by approx. 1.5 cm and thus align the shower curtain rod absolutely horizontally on the ceiling. If you want a smaller distance from the rod to the ceiling, it is possible to shorten the ceiling support rod with a hacksaw, the minimum possible distance is approx. 50mm.
Close rod end with end cap made of stainless steel V2A:

The cap is simply placed on the aluminum profile. The conical bore provides a very secure hold, but also ensures that the cap can be removed without any problems.

The accessories in aluminum glossy white.
L-shaped curved shower curtain rail with inner rail profile Ø 20mm made of aluminium, the white powder-coated surface absolutely matches our brackets and end pieces.
Wall mounting with wall brackets made of aluminum glossy white:

This aluminum support allows stable wall mounting of inner rails perpendicular to the wall. First mount the wall bearing plate with threaded bush on the wall. Slide the wall bearing cap onto the rod. Slide the rod onto the threaded bushing. Screw the cap onto the threaded bush. Lock the rod with grub screw.
Ceiling mounting with the ceiling support white powder-coated:

You can position the ceiling support absolutely freely on the inner rail. First mount the base on the ceiling according to the desired position. You can either attach the base with a hanger bolt or screw it directly with a Spax screw. Then slide the flat nut fastened on the threaded pin into the fastening barrel of the profile and position it according to the base already attached. Screw the ceiling support rod onto the grub screw. Slide the construction towards the ceiling and insert the ceiling support rod into the base. Tighten (not too tight) the socket grub screw. You can adjust the height of the support in the base by approx. 1.5 cm and thus align the shower rod absolutely horizontally on the ceiling. If you want a smaller distance from the rod to the ceiling, it is possible to shorten the ceiling support rod with a hacksaw, the minimum possible distance is approx. 50mm.
Close the end of the rod with the aluminum end cap, glossy white:

The cap is simply placed on the aluminum profile. The conical inner shape of the cap ensures a very secure hold, but also easy removal of the cap.

The accessories are made of aluminum with a black satin finish.
L-shaped curved shower rod with inner profile Ø 20mm made of aluminium, the matt black surface perfectly matches our brackets and end pieces.
Wall mounting with wall brackets made of aluminum black satin finish:

This aluminum support allows stable wall mounting of inner rails perpendicular to the wall. First mount the wall bearing plate with threaded bush on the wall. Slide the wall bearing cap onto the rod. Slide the rod onto the threaded bushing. Screw the cap onto the threaded bush. Lock the rod with grub screw.

Ceiling attachment with the ceiling bracket black satin finish:

You can place the ceiling support absolutely freely on the inner running profile. First mount the base on the ceiling according to the desired position. You can either attach the base with a hanger bolt or screw it directly with a spax screw. Then slide the flat nut attached to the threaded pin into the fastening barrel of the inner barrel profile and position it according to the base that has already been attached. Screw the ceiling support rod onto the grub screw. Slide the construction towards the ceiling and insert the ceiling support rod into the base. Tighten (not too tight) the socket grub screw. You can adjust the height of the support in the base by approx. 1.5 cm and thus align the shower rod absolutely horizontally on the ceiling. If you want a smaller distance from the rod to the ceiling, it is possible to shorten the ceiling support rod with a hacksaw, the minimum possible distance is approx. 50mm.

Shower curtain rod ends with end cap made of aluminum black satin finish:

The cap is simply placed on the aluminum rail. The conical inner shape of the aluminum cap ensures a very secure hold, but also easy removal of the end cap.

ceiling beam length.
Ceiling support length = room height - curtain height - distance to the floor - rod and hook (5cm)

You can also shorten the ceiling support yourself with a hacksaw. Standard ceiling support length for our shower curtain rails=45cm. Min. possible ceiling support length = 5cm. You can also move the ceiling support approx. 1.5 cm down. We can also supply longer ceiling supports, please select under "longer ceiling supports".

Attach shower rails to a sloping roof or a sloping wall.

If you want to attach the shower curtain rod to a slope, you can order the joints for ceiling brackets. First screw this joint to one side of the ceiling support rod (a set screw and a drive-in nut are supplied), then push the other side of the joint into the base and fix it with a base grub screw. So you can easily mount the ceiling support on the wall or roof slope at any angle. You can, of course, combine the ceiling supports with and without a joint on a shower rail, for example if the rail closes on a sloping wall at the side.

Rubber cover against dirt and dust, for mounting barrel, white, black or light gray.

Elastic rubber band, which you can quickly and easily shorten to the desired length with conventional scissors. Then you can simply press the cover strip into the fastening run of the aluminum profile. This way the water, dirt and dust can no longer accumulate in the upper barrel.

Robe hook or bath towel hook "snazzy", for inside shower rails.

So your bathrobe and bath towel are always ready to hand when showering. Simply mount these robe hooks into our inner-running shower curtain rods. These bath towel hooks are made of V2A stainless steel and are absolutely suitable for wet areas. At the same time, the hooks are very flexible and can be attached anywhere on the pole. Simply slide the grub screw with flat nut to the desired position and turn the hook. The stainless steel hook is very robust, but also elegant, attractive and chic, just smart! The hook fits perfectly with our shower curtain rods. This combination looks very classy and guarantees an all-round trouble-free movement of the curtain, even if a bath towel or bathrobe is hanging on the rod. You can also use the shower curtain rail as a towel rail. The dimensions and fastening system can be found in the drawing.